Concrete Services in Las Vegas for Residential and Commercial Projects

Concrete demolition, repair, replacement and installation for residential, commercial and municipal properties throughout the Las Vegas Valley.

People often search for “cement work,” but most finished surfaces are concrete. Cement is the binding ingredient inside a concrete mix, while concrete combines cement, water, sand and aggregate. Customers commonly use both words, so our services cover what Las Vegas property owners usually mean when they ask for cement installation, cement repair or a cement company.

Our concrete services include the complete project sequence when needed: evaluating the affected area, protecting nearby surfaces, saw cutting or breaking existing concrete, hauling debris, preparing the base, installing forms, planning reinforcement, placing the new concrete, finishing the surface and cleaning the work area.

Every project is different. A cracked walkway may require removal and replacement of one controlled section. A commercial access area may require additional scheduling, barricades, traffic planning or coordination with other trades. A new patio or equipment pad requires proper layout, slope and base preparation before concrete is poured. We evaluate the actual site instead of using a one-size-fits-all solution.

Concrete demolition and removal

Concrete demolition is more than breaking a slab. The work must be controlled so nearby walls, utilities, doors, landscaping, pavement and concrete that will remain are protected. Our team can saw cut boundaries, break damaged material into manageable sections, remove debris and prepare the area for the next phase.

Concrete removal may be appropriate when a surface has extensive cracking, severe settlement, broken edges, poor drainage, major spalling or damage that cannot be corrected with a dependable localized repair. We can remove sidewalks, walkways, patio sections, pads, curbs, small slabs and other concrete areas based on access and site conditions.

We also plan the demolition around the property. On commercial and municipal sites, this may include maintaining a safe route for staff, coordinating dumpster placement, working during approved hours and keeping emergency or service access available.

New concrete installation

The visible finish matters, but the work underneath the concrete matters just as much. New concrete installation begins with layout and preparation. The area must be excavated to the appropriate depth, loose or unsuitable material must be addressed, and the base must be prepared for the intended use.

Forms establish the shape, elevation and edges of the new placement. Reinforcement, joints, thickness and mix requirements depend on the project. A pedestrian walkway does not carry the same loads as a driveway or equipment pad. Drainage also matters: exterior concrete should direct water appropriately rather than creating a low area against a structure or a path where water continually collects.

After placement, the concrete is leveled, finished and protected while it begins curing. We discuss access restrictions and expected cure time so the new surface is not loaded too early.

Concrete repair and sectional replacement

Not every damaged area requires replacement of the entire slab. When surrounding concrete remains stable, a focused repair or sectional replacement may be the practical solution. The correct choice depends on the cause and extent of the damage.

We assess cracking, movement, edge failure, surface deterioration, joint condition and drainage. If the base has moved or washed out, simply filling a crack may hide the symptom without solving the underlying problem. Where repair is appropriate, we prepare the surface carefully and use a method suited to the location and type of failure. Where replacement is the more reliable option, we define clean boundaries and replace the affected section.

Concrete slabs and pads

Concrete slabs and pads support many residential and commercial uses. Common requests include utility pads, equipment pads, trash-enclosure surfaces, shed foundations, work areas, storage areas, small additions and replacement sections around existing facilities.

We plan each slab around its intended load, access, drainage and surrounding elevations. The goal is a functional surface that fits the site—not simply a rectangle of new concrete. When utilities, doors, gates, walls or existing paving are nearby, we account for those conditions during planning and preparation.

Sidewalks and walkways

Broken or uneven sidewalks can become trip hazards and may create accessibility concerns. Walkway damage is common around mature landscaping, drainage paths, high-traffic entrances and areas where soil has shifted.

Our sidewalk and walkway services include demolition, removal, base preparation, sectional replacement, new paths and transitions to existing surfaces. For commercial properties, we can coordinate work to reduce interference with customers, residents or employees. We also consider slopes, edges and transitions because a repair should improve the route rather than create a new obstacle.

Driveways and concrete parking areas

Driveways and vehicle areas experience heavier loads than ordinary pedestrian concrete. Damage may develop from settlement, inadequate base preparation, drainage problems, repeated traffic or age. We evaluate the affected area and recommend repair or replacement based on the condition of the slab and the intended use.

Projects may include damaged driveway panels, driveway extensions, transitions, small parking sections and concrete aprons. Proper thickness, reinforcement, joints and cure time are especially important where vehicles will use the surface.

Concrete patios and outdoor living areas

A concrete patio can create a durable outdoor area for seating, grilling and everyday use. We install new patio surfaces and replace damaged areas while considering doors, exterior walls, drainage, landscaping and connections to existing walkways.

The layout should work with the property and the way the space will be used. We discuss size, shape, finish, access and site preparation before work begins. If an existing patio is cracked or settling, we inspect the condition and help determine whether a targeted section or larger replacement makes sense.

Curbs, edges and access transitions

Curbs and concrete edges help manage traffic, protect landscaped areas and define access routes. Damage at an edge can spread when vehicles repeatedly cross the weakened section. We repair or replace concrete curbs, borders and transitions based on the configuration of the site.

At entrances, gates and walkways, the connection between old and new surfaces must be planned carefully. Elevation differences, drainage and pedestrian use all affect the finished result.

Our recent municipal work demonstrates the process behind professional concrete demolition and replacement. At a City of Las Vegas facility near West Lake Mead, the existing concrete included failed and damaged areas around an active service location.

The project required coordination before work started, including site access, storage movement, demolition staging and an early concrete schedule. Our crew used controlled demolition equipment to break and remove the affected concrete while protecting the surrounding facility. The work area was cleared and prepared for the next installation phase.

The video and photographs on this page show real Batito Construction Group crew members performing the work. They are not stock images. Visitors can see the existing condition, municipal setting, active demolition and branded crew on the project.

This experience is valuable for commercial and residential customers because the same fundamentals apply on every project: understand the property, protect what remains, prepare the base, coordinate the schedule, complete the work safely and leave the site organized.

1. Site review and project definition

We begin by reviewing the existing conditions, dimensions, access and intended use. We look at surrounding structures, utilities, drainage, gates, doors, landscaping and surfaces that must remain. This helps us define whether repair, sectional replacement or new installation is the appropriate direction.

2. Written scope and scheduling

The scope identifies the work to be performed and the major steps involved. We coordinate timing, access and any preparation required from the customer. Commercial projects may require additional communication regarding operating hours, occupants, vehicles or restricted areas.

3. Protection and demolition

When removal is required, we establish the work zone and protect nearby areas. Concrete is cut or broken in controlled sections and debris is removed. We avoid unnecessary disturbance outside the defined project area.

4. Base preparation and forming

After demolition or excavation, the area is prepared for new concrete. Forms establish the boundaries and finished elevations. Base conditions, slope, reinforcement and joints are addressed according to the type and intended use of the placement.

5. Concrete placement and finishing

Concrete is placed, leveled and finished for the specified surface. Edges, joints, transitions and drainage receive attention during placement. The work zone remains protected while the concrete begins curing.

6. Cleanup and project review

We remove job-related debris, review the completed area and explain restrictions on foot or vehicle traffic. Good concrete work includes a clear handoff so the customer knows how to protect the new surface during its early cure period.

Las Vegas concrete is exposed to intense sun, high surface temperatures, dry air and sudden temperature changes. Soil conditions and drainage also vary from property to property. These factors make preparation, joints, thickness and curing important.

Fast surface drying can affect fresh concrete, while poor drainage can undermine or stain finished areas over time. Expansive movement, erosion, roots and inadequate compaction can contribute to cracking or settlement. Although no exterior concrete can be promised never to crack, proper planning and workmanship reduce avoidable failures and improve long-term performance.

We evaluate the local site rather than relying only on a standard description. A shaded residential walkway, a sun-exposed commercial pad and a driveway carrying vehicles have different demands.

What is the difference between cement and concrete?

Cement is one ingredient in concrete. Concrete is the finished mixture of cement, water, sand and aggregate. Many customers say “cement work” when they mean a concrete driveway, sidewalk, patio or slab, so both phrases describe the services people commonly request.

Do you provide concrete demolition and removal?

Yes. We provide controlled concrete demolition, debris removal and preparation for replacement. The exact method depends on thickness, reinforcement, access, nearby structures and the amount of material being removed.

Can you replace only one damaged concrete section?

Often, yes. Sectional replacement can be appropriate when the surrounding concrete is stable and the failure can be isolated. We inspect the site to determine whether a focused repair or broader replacement is the better option.

Do you install concrete for both homes and businesses?

Yes. We complete residential and commercial concrete projects, including walkways, patios, pads, slabs, curbs, access areas and damaged-section replacement. Commercial work is coordinated around property operations and access needs.

Can you repair cracks without replacing the slab?

Some cracks can be repaired or sealed, but the cause matters. Active movement, settlement, drainage problems or base failure may make a simple surface repair temporary. We evaluate the condition before recommending a method.

How long before new concrete can be used?

Timing depends on the mix, weather, thickness and intended load. Light pedestrian access may be possible before vehicle traffic, but the project team will provide instructions for the specific placement. New concrete should not be loaded prematurely.

Do you handle permits when required?

Permit requirements depend on the location, scope and whether work affects public right-of-way, structures, drainage or regulated access. We review the project and identify when permits, engineering or agency coordination may be required.

Do you work in Henderson, North Las Vegas and Summerlin?

Yes. Our regular service area includes Las Vegas, Henderson, North Las Vegas, Paradise, Summerlin and Sun City Summerlin. We also review qualifying projects in Boulder City, Mesquite and Pahrump.

Can concrete work be combined with other repairs?

Yes. Depending on the project, we can coordinate related demolition, exterior repair, painting, doors, drywall, flooring or remodeling work through the same team.

How do I request a concrete estimate?

Call 702-752-0758 or send the project details through our contact page. Photos, approximate measurements, the property location and a short description help us prepare for the site visit.

If you need concrete demolition, repair, replacement or a new installation, contact Batito Construction Group. We serve homeowners, businesses, property managers and facilities throughout the Las Vegas Valley with organized concrete and cement work.

Tell us what is damaged, what you want to build and how the area is currently used. We will review the site, discuss the appropriate approach and prepare a clear scope for the project.

Call 702-752-0758 today for concrete services in Las Vegas.

Request an Estimate →

Commercial Property Services →

Home Remodeling Las Vegas →

—

Call Batito Construction Group for concrete demolition, repair, replacement and installation throughout Las Vegas and nearby Southern Nevada communities.